Wednesday, July 24, 2013

REPAIR OF PLASTIC DOOR TRACK

It is not unusual for someone with a big heel to step on the composition molded track of a sliding patio door system and break off a chunk.



Compatible replacement tracks are virtually impossible to find.  But, alas, these tracks can be repaired in less than an hour and be twice as strong as the original.

You will need just a few things... A length of "stainless track cover" cut to the length of the existing track, http://www.allaboutdoors.com/product_info.php?cPath=57_134&products_id=16501&osCsid=e2ca86430627e4bb42f50a429d748dff a 5-Minute epoxy syringe, a tube of steel-filled epoxy putty, several screws, a painter's sanding sponge block and a utility knife.

First, brush and wipe clean the broken area to be repaired.

Then, using screws with a thread diameter no larger than the width of the original track, partially screw them securely, equally spaced, in a line from one side of the break to the other.  The screw heads should be higher than the height of the original track.


Using an angle grinder with a metal cutting wheel, (or some other efficient tool) slice off the heads of the screws slightly below the height of the original track.


Using the steel-filled epoxy putty, begin to fill in the spaces between the screws.  Full hardening time is about fifteen to twenty minutes. (ambient temperature is a factor)

 
 
Keep building up the putty into the approximate shape of the original track.  The putty shape should be slightly higher and wider than the original track.



Then, before the putty fully hardens, using a utility knife, carefully trim excess putty.  As the putty gets hard, use the sanding sponge block and shape the repair to closely resemble the original track.

 
 
Finally, run the 5-minute epoxy inside the length of the stainless track cover, place it over the entire original track, including the repaired portion, tap into place from one end to the other with a mallet and wood block.  Wait 20 minutes... and, Voila!!


The results are better than the original manufactured product.

6 comments:

Dian Tara said...

Nice product. Here are some nice metal putty product to repair corrosion.

Elizabeth J. Neal said...

It is incredible to wear them and not hurt. I love these shoes. Unfortunately I cannot imagine that I will ever buy another pair of Chacos. garage door repair

Unknown said...

pleasant post, stay aware of this fascinating work. It truly regards realize that this subject is being secured likewise on this site so cheers for setting aside time to talk about this! Garage door repair

Home Windows said...

I really like the information provided in this article and I really like the way you have explained each and everything so well. Very well done with the article, hope that you will continue to do posting

Patio Doors
Sliding Glass Doors
Sliding Windows

windows lasvegas said...

This is excellent information. It is amazing and wonderful to visit your site.
Replacement French Doors
Glass Patio Door Replacement
Windows And Doors Las Vegas
Front Entry Doors With Glass
Replace Glass Sliding Door

windows phoenix said...

Very informative and detailed article is this. Love to read it
Window Door
Replacement Sliding Glass Doors